[Cancerous cunt's MKB ramblings] C³ Equalz Tangerine

This month's lab rat switch is the C³ Equalz Tangerines.

There are 2 variations of the Tangerines - 62g and 67g. I've tested both, but mainly went with the 62g variation, because I don't feel the differences when my butter fingers just smashes anything linear. So far, the Tangerines are smoother than the AKs, but I think the margin isn't huge. Compared to AKs, there is a slight wobbliness, but again, not by a huge margin.

The Tangerines are already lubed at stock, so there is no need to further reapply lube, unless you're going to apply films as well, since I read that films make the switches sound better. To ensure I'm correct on this point, I tried to reapply lube on mine (just the 62g, because I have tons of the switches to abuse). I didn't film mine, because again, I have butter fingers, and I tend to fuck things up, instead of making them better. Again, stock or relube, no differences to me.

One downside to the Tangerines is the distorted color of the backlight, since the housing and stem is in tangerine (duh...). I thought my keyboard ran out of battery the first time I used them, and took me a few minutes to realized the battery color indication for the backlight is distorted. If you're a RGB fanboi, get ready to have your backlight in orange hue. This isn't a huge problem for me though, since I don't turn on my backlight, except for the BT, battery, and CAP indicators.

As for the sound, it's something like plasticky poppy clacks. I got used to the sound, even though I'm not really a fan of it. To clarify, my preferences are the muted sound from AKs or the thocky sound from Topres. That said, I think it depends on individual - there are tons of differing opinions on the sound signature, it's always down to your own likings. Here's a sound test video:

tldr; great switches. I don't really care about the sound at this point, the smoothness of the Tangerines are enough to make me happy when typing on my keyboard, especially on a bad day. I definitely recommend buying these to try them out, particularly if you're a linear switches fanboi.

> cancerous cunt's impression: 4/5 * CHEF KISS EMOJIs

[Cancerous cunt's MKB ramblings] Everglide Aqua King v3

After using EG Oreos for a week, and I still can't get used to them. So, I'm swapping them out for the Everglide Aqua King v3 switches. I'm changing the format a bit, will be posting my thoughts after a week of using the switches, instead of right after putting them into the keyboards, so that I can have a better impression of the switches I'm using. That being said, the goal is still to try to use a new switch for a month.

Well, I guess I failed the EG Oreos test.

The EG AKs are linear switches with 3 variations of actuation - 55g, 62g, and 67g. I heard there is a 37g variation, but I'm unable to find that variation anywhere. That said, I went with the 55g variation since they feel just right for me - not too light, not too heavy. As for my impression after a week, this must be the smoothest linear switches I've ever used, I don't feel any scratchiness at all. I'm also quite impressed there is almost no wobble on switches. I'll admit, I'm a pleb for when it comes to the non-mainstream linear switches, since the only other non-mainstream linear switch I've used was NovelKeys Cream switches, and they aren't even comparable to the EG AKs.

These switches are very well lubed from the factory. I read some reviews that mentioned people are getting underlubed or overlubed switches, but I didn't encounter such problems. I thought it might not be a widespread issue, but perhaps I hit the jackpot with this batch. So, I just left mine factory lubed. Hey, don't try to fix something, if it isn't broken, right? I encounter another reported issue where the pins of the switches are bent, and I had to straighten quite a number of them.

Another plus for RGB fanbois is the clear transparent housing and stem. Although I'm not using any backlight on the current keyboard, the transparency will allow the backlight to shine through properly, and with the exact color. For example, I'm using the Gateron Ink Blues on my other keyboard that I turned on the backlight, and due to the blueish transparent housing, my white backlight becomes blueish as well.

I'm not very good in describing the sound of switches, and I'm a pretty pleb typist, since I only know how to type using 3 fingers on each on my hand. No, uh, 4 fingers on my right hand. There is a soft clacky sound when bottoming out the EG AKs, while a higher pitch than expected when topping out. Even though I prefer clicky sounded or thocky sounded switches, I think they sounded pretty nice as well. Here's a random sound test video I found on YouTube:

I'll probably use these babies for more than a month, since I just adore them so much, and skipped 3 weeks on the EG Oreos. I'd highly recommend these switches if anyone would like to try them out.

> cancerous cunt's impression: 4.0 * CHEF KISS EMOJIs

(update)
I've managed to buy a pack of the 37g variation (200 pieces).

After testing a number of other linear switches, I felt maybe my experience with the EG SKs was the ones I owned were only slightly overlube. To test my suspicion out, I bought another batch of EG AKs, and the switches came with this batch were definitely overlube, more than those I were using previously.

Even though, I'm lowering the ratings I gave the EG AKs in this update, I still think the EG Aks are pretty interesting to test out, and if you have the budget, it's worth trying them out.

> cancerous cunt's impression: 3.5/5 * CHEF KISS EMOJIs

[Cancerous cunt's MKB ramblings] Everglide Oreo

I haven't been posting anything on this blog for some time. Close to 3 years, I guess? I've been collecting MKBs and switches for some time, and I thought writing some of my thoughts here would be nice. Enough with the ramblings and let's get down to it!

I'll be starting with the Everglide Oreo switches.

As usual, I've cleaned the keyboard, and lubed the switches. The EG Oreo switches are tactile switches with 55g actuation force.

In my opinion, they're pretty bad without lube - feel very scratchy; I feel lubing is a must. The initial press feel nice, you can feel a pronounced tactile bump, if you're switching from the usual mainstream tactile switches, ie Cherry Browns and its variants. That said, it feels "sticky" when bottoming out, with or without lube. You can feel this, at least I felt it, pretty easily especially on the larger keys. As for the sound, they sound a lot better than the usual mainstream tactile switches.

To be honest, I'm kinda indifferent toward these switches, even though I'm a faiboi tactile/clicky switches. I'll try to use them for the month. Next month, I'll be testing out the Everglide Aqua King switches.

> cancerous cunt's impression: 3/5 * CHEF KISS EMOJIs